p1617 is the code the scanner gives

Installed code from a friend of mine. Code reads p1617. Went to chart, p1617& p1618 shows same but when topic page is opened specifies for p1618 as trans scensor. This does not make sense as to not being able to start after seal replacement . I have checked all wire connections as advised an pin...

yes sir, i installed everything back to the exact location it was removed from, and have gone back and double checked them. car was running , but leaking when repair begain.

I installed the cam part as to the same position i removed it, it fits properly in the slots. For curiosity I reversed it after reading from help line and it does not fit properly the other way, its off center. The sensor wire is at 8.00 which is the same position as it was when removed. The triangu...

Performed the camseal replacement as perscribed from all of you. Thank You Was careful at replaceing everything to its proper location, especially the timing sensor plate, of course it only fits correctly one way. All hoses are connected to there orginal place , all electrical plugs as well. Cleaned...

could this be the cam bank seal?

when viewing from underneaht the steady drip drip comes from upper right rear area of engine. Cannot see from air box area have been tring to find and enginebreakdown veiw to better undestand what is there that could leak oil before removing any items unnecessary.Would like to repair myself. Any sug...