No grease back on A or B

Shim on both A and B

Had put plate on pads before, but the trick was to only put it only on half the pad to get an angle

Problem solved

Mounted anti squeke plate back on half the pad front

Two days without noise

Yes started with old parts and then started to change Has changed rotors, pads, caliperes and hoses Has hit no holes I suspect that part because sometime I think the noise comes from left and right. Sometimes front and somtimes back The pins move in and out into pistons in the control unit If the pi...

No the pins from this that goes into the control unit

https://www.ebay.com/itm/NEW-Genuine-AC ... SwHN9cetzO

Yes 1 to 3 is right and noise didn`t change

Just think if the pins that comes out from the hydraulic box to the controlunit is hanging, that is could cause it ?

yes all is clean and yes it`s new

Is the same rotor on both sides. No left or right

I can try to swap, but sometimes it`s like the noise from front and sometimes from the back

just come to thinking of could it have something to with the hydraulicpump ?

because sometime I think the noise comes from different wheels
have driven with different people and some front and others say back and some says left and others right

Just don`t understand why I get noise and should bed
As I wrote that I have never bed before and we don`t do it at work
This it the first time I get that noise and no one at work knows why

Just changed caliperes and after 5 km sound came again

Got the car 3 years ago and changed rotors and pads - no bedding
Changed in septemper last year to 16" rotors and new pads - no bedding