The high beam/low beam shifter works only once in a while. It will shift to high beam but returns to low as soon as the arm is released. I suspect the headlight relay to be malfunctioning.
- How do i locate the relay? It does not seem to sit around the others under the instruments and beside the fuses as the rest of the relays.
- Does anyone know how to test and if in need to repair a relay?
- Are there any other places to look for faults?
240, 1993, locate headlight relay
-
kaerlighedsbamsen
- Posts: 17
- Joined: 22 February 2008
- Year and Model:
- Location:
-
billofdurham
- MVS Moderator
- Posts: 6507
- Joined: 2 February 2006
- Year and Model: 855, 1995
- Location: Durham, England
- Been thanked: 5 times
It is next to the battery.
The only way to test a relay is by replacing it with a known good one.
You can open the case to see if any solder joints have come apart and re-solder them.
The switch itself may have developed a fault.
Bill.
240 headlight relay.pdf- (48.43 KiB) Downloaded 651 times
You can open the case to see if any solder joints have come apart and re-solder them.
The switch itself may have developed a fault.
Bill.
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
kaerlighedsbamsen
- Posts: 17
- Joined: 22 February 2008
- Year and Model:
- Location:
Bill you are once again a star! Will return with resuts.
Best of luck!
Ty
Best of luck!
Ty
-
- Similar Topics
- Replies
- Views
- Last post