'93 940 brake light switch access.

siemonhg · Post by **siemonhg** » 14 Nov 2010, 12:42

How do I remove the panel under the steering column in order to access the brake light switch at the brake pedal?

Post by **billofdurham** » 14 Nov 2010, 15:34

This should help. The steering wheel has only been removed for clarity.

: untitled.jpg (19.42 KiB) Viewed 2851 times

Bill.

siemonhg · Post by **siemonhg** » 14 Nov 2010, 18:50

Wow ! That simple. Great ! Thanks again !

funnyrocket · Post by **funnyrocket** » 30 Nov 2010, 10:08

Is there any way you can give me step by step instructions. I'm going to try this myself before I pay way to much to get it done. Thanks in advance.

Post by **billofdurham** » 30 Nov 2010, 11:13

Welcome to Matthew's Volvo Site.

It is quite easy. The brake light switch sits on a bracket behind the brake pedal. Remove the sound proofing panel as shown above. Follow the instructions attached:

940 brake light switch.pdf: (35.48 KiB) Downloaded 866 times

The reference to the SRS is a safety feature. When working on any electrical system near to air bags disconnect the negative lead of the battery and wait a few minutes before starting work. This prevents accidental deployment of the air bags. Make sure you have the radio code before disconnecting the battery.

When you have the new switch in position it should be adjusted so that the brake lights come on when the pedal is depressed 0.3" to 0.6" or 8 to 14 mm.

Bill.

mseidl-77 · Post by **mseidl-77** » 03 Dec 2013, 20:09

i am trying to replace the stop light switch on my 93 940, i followed what was said to do but mine is different. it has one plug for wires and the other is a hose, and all the switch i can find for my car are just like the one on your site, please help

lummert · Post by **lummert** » 03 Dec 2013, 23:17

The hose is probably for the cruise control.