Hi,
How do I get the clutch out?
I've taken the 10mm nut off from the center of the clutch plate. Don't want to pry or force anything and risk damaging anything. There must be a method...anybody done this before ...ideas?
thanks.
AC Compressor Clutch
- rspi
- Posts: 7304
- Joined: 05 Nov 2011, 10:40
- Year and Model: 850 T-5R Wagon
- Location: Cincinnati OH
- Has thanked: 34 times
- Been thanked: 72 times
-
Contact:
Contact rspi..
You can try this: http://volvoforums.com/forum/volvo-850- ... ming-6665/
'95 855 T-5R M, Panther - 22/28 mpg, 546,000 miles
'95 955 T-5R Yellow Wagon, Lemonade, 180,000 miles
--------------------
Volvo's of past: '87 740 GLE, '79 262C Bertone, '78 264, 960's, '98 S70 GLT, '95 850 T-5R YellowVolvo Repair Videos
'95 955 T-5R Yellow Wagon, Lemonade, 180,000 miles
--------------------
Volvo's of past: '87 740 GLE, '79 262C Bertone, '78 264, 960's, '98 S70 GLT, '95 850 T-5R YellowVolvo Repair Videos
-
Ozark Lee
- MVS Moderator
- Posts: 14798
- Joined: 07 Sep 2006, 08:24
- Year and Model: Many Volvos
- Location: USA Midwest
- Has thanked: 4 times
- Been thanked: 76 times
Volvo sells a special puller but it is actually fairly simple if you pick up steering wheel puller. It needs to have three slots.
Inside of the rivets on the face of the clutch are three holes that are threaded. Find some appropriately sized bolts that thread into those holes and then use the puller to pop the clutch off.
...Lee
Inside of the rivets on the face of the clutch are three holes that are threaded. Find some appropriately sized bolts that thread into those holes and then use the puller to pop the clutch off.
...Lee
'94 850 N/A 5 speed
'96 Platinum Edition Turbo
Previous:
1999 V70XC - Nautic Blue - Totaled while parked.
1999 V70XC - RIP - Wrecked Parts Car.
1998 S70 T5
1996 850 N/A
1989 740 GLT
1986 740 GLT
1972 142 Grand Luxe
'96 Platinum Edition Turbo
Previous:
1999 V70XC - Nautic Blue - Totaled while parked.
1999 V70XC - RIP - Wrecked Parts Car.
1998 S70 T5
1996 850 N/A
1989 740 GLT
1986 740 GLT
1972 142 Grand Luxe
Stuck again
If it wasn't for the above two inputs I wouldn't have even gotten to this part so thank you very much. The mentioned link has excellent info, however it's not very clear on getting the clutch off the compressor.
Using the three threated holes I've gotten off the 1st plate, but now I don't know how to get the rest off?? Should I use a puller like this one...(plz see below). Also there is a pin inside the shaft...I have no idea if that needs to come out before or after?
Thanks agian for your help.
Using the three threated holes I've gotten off the 1st plate, but now I don't know how to get the rest off?? Should I use a puller like this one...(plz see below). Also there is a pin inside the shaft...I have no idea if that needs to come out before or after?
Thanks agian for your help.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 578 Views
-
Last post by vtl
-
- 3 Replies
- 1647 Views
-
Last post by ehirsh
-
- 1 Replies
- 883 Views
-
Last post by abscate
-
- 1 Replies
- 467 Views
-
Last post by Ozark Lee
-
- 1 Replies
- 677 Views
-
Last post by Daniel-isley






