95 850 No Start - 2nd CPS

Post by **cuhfs** » 21 Jul 2015, 19:12

Had a no start on the 850 and it was the Cam Position Sensor. Replaced it and was good for a few months.
No start is back again and seems like it is very likely the CPS again. Tested the fuel relays and swapped some wires etc... seems like CPS is the suspect. Any idea what would cause a CPS to fail so soon again. Used Bosch Brand last time? also no codes. In fact A-6 does not light which seems odd too. Any CPS advice would be great. Thanks

Post by **abscate** » 21 Jul 2015, 19:15

If you route the CPS wires too close to spark plug wires the car won't run. Check for threads on correct routing.

Post by **cuhfs** » 21 Jul 2015, 19:27

Moved them away the mount to the engine had broke last repair so it flopped more than usual. Moved wire away from all and still no start. Could that have killed the part?

Post by **cn90** » 21 Jul 2015, 21:00

Was the Bosch CPS new or used?
Get some used CPS from junkyard and try again.