car sat for 6 years, made it run, but lifters are flat and clatter worse than a diesel. I want to pull the cam cover to remove and soak the lifters to see if they will pump up. Also I want to lube the journals and lobes. But I'm used to my 98 N/A.
How do I get the fence of turbo lines off the back of the head so I can remove the cam sensor?
I don't see an obvious bolt for the clip holding them in place, or a spot to push them aside.
Those of you who have gone before...thanks
98 T5 all those lines in the way
-
FLXC90
- Posts: 1132
- Joined: 18 Aug 2014, 16:31
- Year and Model: 98 V70 T5
- Location: Florida Panhandle
- Has thanked: 16 times
- Been thanked: 45 times
Current Volvos:
1998 V70 T5, 112k sat 5 years, still in mechanical coma (finally at the top of the pile )
2004 XC90 T6 AWD: 186k, 60 on transaxle ( traded in )
1998 POS70 N/A: DD/training aid, 236k but really about 240k, I think...ABS module( passed on to son who sold it)
1998 V70 T5, 112k sat 5 years, still in mechanical coma (finally at the top of the pile )
2004 XC90 T6 AWD: 186k, 60 on transaxle ( traded in )
1998 POS70 N/A: DD/training aid, 236k but really about 240k, I think...ABS module( passed on to son who sold it)
-
Ozark Lee
- MVS Moderator
- Posts: 14798
- Joined: 07 Sep 2006, 08:24
- Year and Model: Many Volvos
- Location: USA Midwest
- Has thanked: 4 times
- Been thanked: 76 times
I think you are making this harder than you need to. Just run the car and let them clack for a while, they will pump up on their own so long as you have oil pressure and it won't hurt anything.
...Lee
...Lee
'94 850 N/A 5 speed
'96 Platinum Edition Turbo
Previous:
1999 V70XC - Nautic Blue - Totaled while parked.
1999 V70XC - RIP - Wrecked Parts Car.
1998 S70 T5
1996 850 N/A
1989 740 GLT
1986 740 GLT
1972 142 Grand Luxe
'96 Platinum Edition Turbo
Previous:
1999 V70XC - Nautic Blue - Totaled while parked.
1999 V70XC - RIP - Wrecked Parts Car.
1998 S70 T5
1996 850 N/A
1989 740 GLT
1986 740 GLT
1972 142 Grand Luxe
-
Clockboy
- Posts: 105
- Joined: 13 Jan 2015, 21:24
- Year and Model: 05 xc70, v70 2.5t 06
- Location: New york
- Has thanked: 2 times
- Been thanked: 1 time
I'm sure Lee is right, but just thought I'd chime in on the fence issue since I just had this problem. The fence on my 98 v70 awd was secured by the lower bolt for the cam sensor. It has a part tucked under the cam sensor and the bolt runs through the sensor, through the fence and into the engine.
-
FLXC90
- Posts: 1132
- Joined: 18 Aug 2014, 16:31
- Year and Model: 98 V70 T5
- Location: Florida Panhandle
- Has thanked: 16 times
- Been thanked: 45 times
Yeah, I'm sure you're right. guess I was getting over-paranoid to protect my over-engineered motor.
On the other hand, it will have a fresh timing belt, and I did discover that the FPR vacuum line was rusted completely closed where it snapped at the rubber connector to the plastic vacuum line!
It's going back together and I'll just let it idle a while.
Thanks
On the other hand, it will have a fresh timing belt, and I did discover that the FPR vacuum line was rusted completely closed where it snapped at the rubber connector to the plastic vacuum line!
It's going back together and I'll just let it idle a while.
Thanks
Current Volvos:
1998 V70 T5, 112k sat 5 years, still in mechanical coma (finally at the top of the pile )
2004 XC90 T6 AWD: 186k, 60 on transaxle ( traded in )
1998 POS70 N/A: DD/training aid, 236k but really about 240k, I think...ABS module( passed on to son who sold it)
1998 V70 T5, 112k sat 5 years, still in mechanical coma (finally at the top of the pile )
2004 XC90 T6 AWD: 186k, 60 on transaxle ( traded in )
1998 POS70 N/A: DD/training aid, 236k but really about 240k, I think...ABS module( passed on to son who sold it)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 835 Views
-
Last post by nsjames
-
- 3 Replies
- 1542 Views
-
Last post by rguzz
-
- 2 Replies
- 346 Views
-
Last post by abscate
-
- 1 Replies
- 4162 Views
-
Last post by GreenMagicMan
-
- 12 Replies
- 3403 Views
-
Last post by GreenMagicMan