Recommendation on where to get silicone hoses for vaccum lines 98 volvo v70xx

Switchemlee · Post by **Switchemlee** » 25 Apr 2017, 22:08

Just looking for opinion on where to purchase good strong hoses for vaccum lines

Post by **jreed** » 26 Apr 2017, 05:22

I have purchased silicone hoses from Verocious (www.verociousmotorsports.com) four times over the past 8 years. They are great quality, platinum cured thick-wall hoses. They are durable.

http://www.verociousmotorsports.com/Sho ... y-the-Foot

blkbeauty · Post by **blkbeauty** » 26 Apr 2017, 06:19

Ebaymotors has plenty!

BrianL · Post by **BrianL** » 26 Apr 2017, 08:25

This is what I bought. http://www.siliconeintakes.com/liquid-a ... 97ecc0b7d2

Post by **theWIFES_S70** » 26 Apr 2017, 13:56

BrianL wrote: ↑26 Apr 2017, 08:25 This is what I bought. http://www.siliconeintakes.com/liquid-a ... 97ecc0b7d2

This looks like a good package deal. I still can't believe in all our infinite wisdom (and all the support we get from our suppliers) we still don't have a definitive vacuum hose chart for Turbos and N/As. I think I'm going to go in on this one and see how it might apply to our N/A.

Switchemlee · Post by **Switchemlee** » 28 Apr 2017, 02:18

Sweet ill look into them sucks that that deal is out of stock currently but im dealing with a high psi of 15 to 20. So im not really sure what it is so maybe replace all lines and see if thats it

Switchemlee · Post by **Switchemlee** » 28 Apr 2017, 02:19

It wasnt boosting at all the other. Day and i just found that my actuator arm wasnt even connected...Haha now its boosting again but its boosting pretty high according to torque app boost guage

Post by **erikv11** » 28 Apr 2017, 09:41

FYI the torque app cannot tell the actual boost psi. It is just guessing based on other engine management values, and it is reported to be not a very accurate guesser.

Switchemlee · Post by **Switchemlee** » 28 Apr 2017, 11:35

Ok thank you good to know

Post by **abscate** » 07 Sep 2020, 04:13

erikv11 wrote: ↑28 Apr 2017, 09:41 FYI the torque app cannot tell the actual boost psi. It is just guessing based on other engine management values, and it is reported to be not a very accurate guesser.

It doesn’t guess, it asks Psiri