2005 V70NAM56 P0106 ECM104A MAP SENSOR

Post by **abscate** » 13 Oct 2017, 15:33

After clutch job (relevance?) I had a very slight hunting - after 100 miles CEL.

I read off P0106, MAP SENSOR ERROR and ...

found that dropping the engine had pulled the vacuum hose off the MAP sensor above the radiator fan, just under the plastic grill piece. Picture to follow

Reattach and problem cleared, confirm in 100 miles running.

Post by **abscate** » 13 Oct 2017, 15:41

Looking back at the transmission removal procedure

No mention of removing the MAP vacuum hose - this DOES need to be done or it will pull off when the engine is dropped.

Post by **abscate** » 14 Oct 2017, 19:22

CEL cleared after 50 miles of driving