[V70,2.4T,2001r.] Problem with ECM-9150. What can i do?

Sigmarus · Post by **Sigmarus** » 11 Jul 2018, 04:09

Hi guys.

I have strange problem with my throttle (Megneri Mirelli). From couple days I have error code - ECM-9150.
I have VIDA but cant do a ETM test because i have old software.

I make a test and i thing my results are OK. The car dont have typical throttle problem symptoms.
Firstly i wanted to change by myself TPS - posision sensor but i'm not 100% sure is that a problem.

I dont know what can i do with it.

Thanks

Msa001 · Post by **Msa001** » 11 Jul 2018, 15:17

9441158 Relay, try to replace it.

Sigmarus · Post by **Sigmarus** » 12 Jul 2018, 06:27

Msa001 wrote: 11 Jul 2018, 15:17 9441158 Relay, try to replace it.

You think airpump relay in CEM relays box?

Msa001 · Post by **Msa001** » 12 Jul 2018, 14:34

Ecu relay gives voltage to etm and other components. Some have cured etm problems like you have replacing this relay. The relay is cheap.

Sigmarus · Post by **Sigmarus** » 20 Jul 2018, 13:33

Msa001 wrote: 12 Jul 2018, 14:34 Ecu relay gives voltage to etm and other components. Some have cured etm problems like you have replacing this relay. The relay is cheap.

I changed relay but nfortunatelly didnt work. The error still return after 3 driving cycles. I have no idea what i have to do. I dont want to change ETM or the sensor till i have sure is that problem.
The car drive ok.

Thanks