Overboost triggered
Overboost triggered
Hi , Hoping someone can help. I have a P2566 fault code on my Volvo 1.6 edrive . Which is turbo position intermittent . Status at the moment , Actuator replaced , turbo out and tested veins cleaned , Boost control valve changed , boost position sensor changed. Vaccum pump checked and working . Vaccum pressure good checked all to solenoid. couldnt find any leaks on the air hoses. Any other ideas . I am flat out .
- RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
I think you need a different OBD scanner. I cannot find P2566 used on anything other then a D4204Tx. If your going to your own diagnostics and repair an Volvo VIDA/DiCE is a good investment. You might want to check you configuration with the Volvo Vin Decoder.
On the D4204Tx, P2566 = ECM-2566 = Position sensor turbocharger (TC).
1. Signal missing, Loose connections, contact resistance or oxidation in the terminals or wiring
2. Damaged position sensor.
On the D4204Tx, P2566 = ECM-2566 = Position sensor turbocharger (TC).
1. Signal missing, Loose connections, contact resistance or oxidation in the terminals or wiring
2. Damaged position sensor.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 1907 Views
-
Last post by jaumegarriga
-
- 2 Replies
- 991 Views
-
Last post by mnmk






