Login Register

3-Way Radiator Hose Problem

Post Reply
PoppySheaf
Posts: 51
Joined: 17 Dec 2018, 19:14
Year and Model: 2008 XC90
Location: Columbus, Ohio
Has thanked: 8 times
Been thanked: 1 time

Post by PoppySheaf »

2008 XC90 3.2 AWD

Just finished tranny (gearbox) swap and everything works well.

However, having some trouble with the lower radiator hose in the front.
The plastic part that attaches to the water pipe coming from the water pump
seems to come loose even though I push it all the way up on the pipe and turn the grey tightening part.

Anyone come across this before?
31YSI6B5WeL._SX466_.jpg
31YSI6B5WeL._SX466_.jpg (8.29 KiB) Viewed 688 times
Thanks

User avatar
pgill
Posts: 813
Joined: 27 Aug 2018, 17:42
Year and Model: 2010 S80, 2008 LR2
Location: California
Has thanked: 120 times
Been thanked: 189 times

Post by pgill »

I did replace mine on my 2008 Land Rover 3.2 but i didn't replace it on my 2010 S80 3.2 (Same engine for both)

So its been a while.

If I understand the lock correctly you need to rotate it to align to the pockets shown in the picture below and then the latch will click when it seats in the recess of the pipe.

To unlatch you rotate the grey part so that it is not in the recess and then disconnect the pipe

Here is a picture of the mating piece
pipe.jpg
pipe.jpg (27.94 KiB) Viewed 677 times

PoppySheaf
Posts: 51
Joined: 17 Dec 2018, 19:14
Year and Model: 2008 XC90
Location: Columbus, Ohio
Has thanked: 8 times
Been thanked: 1 time

Post by PoppySheaf »

Thanks. If it comes loose again I’ll pay more attention to the pockets as a guide.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post