Login Register

Driver side cv axel replacement

Post Reply
chrism
Posts: 1351
Joined: 28 Jan 2009, 09:38
Year and Model: S80 / 2005
Location: Atlanta, GA
Has thanked: 7 times
Been thanked: 89 times

Post by chrism »

As I recall the lower control arms and the bump stops are sold as separate pieces so you have to move the stops from the old LCA to the new LCA.
Top
User avatar
jonesg  
Posts: 3697
Joined: 16 Jan 2008, 15:25
Year and Model: 2004 V70
Location: Northern maine.
Has thanked: 73 times
Been thanked: 532 times

Post by jonesg »

DonnVa wrote: 29 Jul 2021, 06:21 Geez, if it were me, I would take every precaution known to man and put the front up on jack stands, put it in gear, get out watch and listen. Let it tell you what’s going on. You’ve got a head scratcher there.
hope the AWD doesn't kick in.
Top
cn90
Posts: 8358
Joined: 31 Mar 2010, 09:54
Year and Model: 2004 V70 2.5T
Location: Omaha NE
Has thanked: 4 times
Been thanked: 504 times

Post by cn90 »

If the XC70 is missing the steering stops (mounted on the control arm), check the wheel well liner, it is probably chewed up by the tires by now.

PS: My 2005 XC90 2.5T has steering stopper installed inside the steering rack. Photos in forum.
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
Top
User avatar
DonnVa
Posts: 239
Joined: 10 Jul 2020, 15:15
Year and Model: 2005 XC70
Location: Mechanicsville, VA
Has thanked: 21 times
Been thanked: 61 times

Post by DonnVa »

jonesg wrote: 30 Jul 2021, 13:46
DonnVa wrote: 29 Jul 2021, 06:21 Geez, if it were me, I would take every precaution known to man and put the front up on jack stands, put it in gear, get out watch and listen. Let it tell you what’s going on. You’ve got a head scratcher there.
hope the AWD doesn't kick in.
LOL
2005 XC70 Cross Country 2.5T 185k miles
1962 122s 4dr 100k+ TMU
-Previous-
2007 S60 2.5T
1996 850 GLT
1974 164E
-Notable-
1983 911sc
1994 325i
2007 335 coupe
30 + other cars and trucks
Top
wool
Posts: 35
Joined: 26 Jul 2010, 22:32
Year and Model: 2007 s40
Location: US
Has thanked: 8 times

Post by wool »

The lower control arms do not have any mounting holes
Top
cn90
Posts: 8358
Joined: 31 Mar 2010, 09:54
Year and Model: 2004 V70 2.5T
Location: Omaha NE
Has thanked: 4 times
Been thanked: 504 times

Post by cn90 »

A thread like this without photo is basically useless...

You need to take a few photos and post them here.

The 2004 V70 and XC70 uses the same control arm.
And the control arms has holes drilled for the steering stop.

This photo is from my 2004 V70 FWD when I replaced the axle seal, you can clearly see the steering stop...

Image
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
Top
wool
Posts: 35
Joined: 26 Jul 2010, 22:32
Year and Model: 2007 s40
Location: US
Has thanked: 8 times

Post by wool »

Yes I understand your point and know where the stops are placed but my control arms do not have threaded mounting holes foe a stop
Top
User avatar
GlennG2759
Posts: 248
Joined: 30 Jun 2018, 15:39
Year and Model: 2006 V70 NA
Location: Mid Hudson Valley N.Y.
Has thanked: 112 times
Been thanked: 17 times

Post by GlennG2759 »

Who is the manufacturer of the CA’s ?
Top
vtl
Posts: 4926
Joined: 16 Aug 2012, 13:35
Year and Model: 2005 XC70
Location: Boston
Has thanked: 129 times
Been thanked: 686 times

Post by vtl »

2005+ XC70 don't have the stops.
Top
User avatar
Blacklab467
Posts: 1139
Joined: 09 Aug 2016, 16:25
Year and Model: 2007 xc 70
Location: Calgary, AB
Has thanked: 117 times
Been thanked: 271 times

Post by Blacklab467 »

My '03 XC 70 doesn't have the stops either.
2003 XC 70 (sold)
2007 XC 70, 1970 Dodge Charger R/T.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “S60, V70, V70-XC 2001-07”