VIDA 2014D_Repack install on Windows 10, any version.

Robopat · Post by **Robopat** » 01 Apr 2022, 06:14

Resistance is futile.

testing4567 · Post by **testing4567** » 01 Apr 2022, 09:33

Robopat · Post by **Robopat** » 01 Apr 2022, 12:38

Hello again,
I got Vida running, I entered all vehicle information, I plugged dice unit run diagnostic test for dice says ok but read vehicle doesn’t work.
When I first open Vida read vehicle is highlighted and works for a minute and after 3 sec stops.
Any guidance you can give me on that?
Thanks

Post by **RickHaleParker** » 01 Apr 2022, 16:30

Robopat wrote: 01 Apr 2022, 12:38 Hello again,
I got Vida running, I entered all vehicle information, I plugged dice unit run diagnostic test for dice says ok but read vehicle doesn’t work.

Make sure partner group is set to AME ( American ). Then click [read]. You don't need to fill out all the information, [read] will find it. The easy way not to forget this is to login with a 2.

Robopat · Post by **Robopat** » 01 Apr 2022, 17:25

Hey Rick,
It is set to American when I press read it does it for about 10 secs and read stops and from there only dice configuration is highlighted read vehicle.
I was looking at one of your earlier posts and you said to make sure IE hosting is set correctly but I can’t find the file to do that.

Robopat · Post by **Robopat** » 01 Apr 2022, 17:31

Have the IE tab running, but I can’t ding the utility file to make sure the correct hosting is enable.

Robopat · Post by **Robopat** » 02 Apr 2022, 10:48

Hello everyone,
I think I had the dice working, I run tests from the file and everything checks ok.
Before I read the car I run the diagnostic on Vida checks ok.
Before reading the car information and diagnostic tabs are inactive once I read vehicle only information tab gets highlighted and operational but diagnostics stays off.
Anybody have any suggestions?
Thanks in advance.

Post by **matthew1** » 02 Apr 2022, 11:20

Hi Robopat

Can you please create a new topic for this? It's now squarely into DICE territory, and this thread is VIDA install.

Robopat · Post by **Robopat** » 02 Apr 2022, 12:09

Hello everyone,
I think I had the dice working, I run tests from the file and everything checks ok.
Before I read the car I run the diagnostic on Vida checks ok.
Before reading the car information and diagnostic tabs are inactive once I read vehicle only information tab gets highlighted and operational but diagnostics stays off.
Anybody have any suggestions?
Thanks in advance.

Robopat · Post by **Robopat** » 02 Apr 2022, 12:11

Hey Matthew,
Sorry about that,
I sorted everything out with dice. Now I just have a bunch of codes that don’t go away.
Thanks for your help on this topic and thanks to Rick Hale for his help.