Login Register

DICE and USB issues Topic is solved

How to buy, install and use VIDA, VADIS, DiCE, VMWare and all the questions and answers that come with these tools.
Post Reply
Geevs
Posts: 140
Joined: 9 November 2003
Year and Model:
Location:
Has thanked: 9 times
Been thanked: 2 times

DICE and USB issues

Post by Geevs »

I have a clone DICE unit that was working fine for a couple of years. Then I had to use it recently and the USB LED is not staying solid yellow. It would flash about 5 times after connecting the USB cable and then the LED goes blank. The green LED is constantly flashing green and the Interface status LED would also constantly flash orange.

The weird thing is my laptop recognizes the DICE unit as a USB device called Setek AB. I am running Linux Mint 21.3 on the laptop and a VM running W7 and VIDA 2014D. With the car running, VIDA doesn't seem to see the DICE unit - when I click on 'Read Vehicle' - it says ignition must be on or some issues with the CEM.

Any suggestion on how to troubleshoot? I already removed the side cover to unplug/replug the USB cable and it didn't work. Wondering if I need an updated Linux USB driver - I noticed the problem started when I upgraded my Linux mint OS.

Thanks!
Top
Geevs
Posts: 140
Joined: 9 November 2003
Year and Model:
Location:
Has thanked: 9 times
Been thanked: 2 times

Post by Geevs »

Problem solved - it was the VM running VIDA as it didn't recognize the redirected USB port. Fortunately, had a working backup of the VM.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “VIDA, VADIS, DiCE”