Bevel protractor for head bolts???

[beewstew]

Just got the head installed on a 2004 XC70 with a 2.5l 5 cylinder. Torquing the first two stages was pretty straightforward, but now I need to do 130° of further rotation on the 10 new head bolts. Are bevel protractors and actual tool that I can buy at an auto parts store? I've never seen one in the wild before. Should I just draw 130° on the top of the head with a sharpie and hope for the best?



https://charm.li/Volvo/2004/XC70%20L5-2 ... rotractor/

Update: the local auto parts stores do not have these in stock "anymore". Had to go with Amazon.

Resolved: 130deg wasn't that hard w a 24" breaker bar. Thanks for the Amazon suggestions.

https://1drv.ms/i/c/7045d4cf7fedc911/Ef ... CyaUQvjaNg

https://1drv.ms/i/c/7045d4cf7fedc911/EZ ... PdcIiIQYIA

[dikidera]

The cheapo I got one was a Chinese one. They come in different flavors, the gyst is to have it stay still so that you can do the final 130 degrees.

A small warning though, 130 degrees is very very hard to do

[ignatz]

What time is it? 4:30 ......... AM or PM....don't matter.

[vtl]

It is a thing, yes. Don't remember, Amazon or Harbor Freight.

1.jpg (114.93 KiB) Viewed 129 times

[vtl]

Lisle 28100

https://www.amazon.com/gp/product/B0002STSW6

1.jpg (54.07 KiB) Viewed 129 times

[vtl]

A small warning though, 130 degrees is very very hard to do

We feed ourselves better in America And use 4 ft pipe on a 2 ft breaker bar, too.

[dikidera]

A small warning though, 130 degrees is very very hard to do

We feed ourselves better in America And use 4 ft pipe on a 2 ft breaker bar, too.

It must be the cereal

[BlackBart]

I've never used one of these, I've just made paint marks to judge where I was. Does the jumper cable-looking clamp just hold it from rotating?

[vtl]

I've never used one of these, I've just made paint marks to judge where I was. Does the jumper cable-looking clamp just hold it from rotating?

Yes.