Upper Engine Mount

kaddo · Post by **kaddo** » 28 Nov 2009, 06:36

polskamafia mjl wrote: Lol, I just like lots of pictures.

How many of these would you like to see?

Geordie · Post by **Geordie** » 26 Sep 2011, 16:46

There is also a gasket caulking that I'll try on my '99 S80 to fill these voids called "RightStuff" by Permatex. They say it's "elastometric rubber technology that protects against leaks caused by vibration & thermal expansion." I feel this will withstand the engine temperature changes better than silicone. I've replaced the entire OEM Mount once already & the 2nd one only has 27,000 km's & 3 yrs. on it. A new Mount is $108. I'll let you know how it turns out.

turbozutek · Post by **turbozutek** » 28 Sep 2011, 10:44

Pffft. Amateurs.

Let me show you have a true professional repairs this unit:

: High Quality Engine Mount Repair.jpg (82.11 KiB) Viewed 1083 times

The only material which can correctly hold this arm in place and deal with the heat and torsional stresses placed on it... Wine corks. After fitting this, the 850 in question became Mach1 capable and produced fuel economy figures above 50Mpg.

Lol!

Post by **cn90** » 28 Sep 2011, 10:47

1+,

LOL, very nice innovation.

On another note, I have had the IPD Polyrethane Mount now for 8 years, zero issues.

PS: Just saw IPD sells Lemforder Upper Engine Mount for $5, is it possible it is that cheap?

http://www.ipdusa.com/products/7355/943 ... gine-mount

Post by **tjts1** » 28 Sep 2011, 17:18

Its easier to replace it with a poly mount.

Post by **Juan62** » 28 Sep 2011, 17:22

CN90,
Yes, five dollars is cheap, found the same one on FCP Euro just over $12.00.

Upper Engine Mount

Re: Upper Engine Mount