Lmao… i was thinking more like my Grandma’s grand marquis back in the day. Those things drive like a cloud and haul ass.

cancunia wrote: ↑12 Jul 2022, 01:03 That's good news! Can you share a link for the device that you bought?
Thanks

https://www.aliexpress.com/item/1005003548427391.html

Above is the one I purchased.

Isn’t BOAT an acronym for “Bust Out Another Thousand”?

Location : Windsor, ON, Canada Tools : Jack, jackstands, VIDA/JLR(DICE), good multimeter, sledgehammer There's really only 1 mechanic I trust with my car within a 300km radius of my location. So if anyone local is having issues with their Volvo I'd be happy to brainstorm with them. My knowledge isn'...

Your CEM diagnosis may or may not be correct. Hard to tell 100% without using VIDA to read all of the car’s codes. Yes running the AC helps. Some people have added a 12v computer fan to blow on the CEM. I would probably just unclip it and hang it near the air vent and take frequent breaks if I were ...

My car overfills. If I'm at Costco (high velocity pumps) and leave the pump in until it clicks itself off, it ends up leaking out of the filler hole, and out of the vent. I was told that it was possibly a clogged vent canister, I took it out and blew it out with compressed air. It didn't fix the iss...

On that note. Has anyone seen a good guide for replacing puddle light bulbs? Last time I attempted it I broke the mirror glass and vowed not to attempt it again.

Light stays on solid. A broken tone ring will never feedback correct wheel speed. Call partsource or another local parts store (carquest, napa) and ask if their code reader reads ABS codes. Those places will scan your car for free. Look up the thread I’m active in regarding the JLR Mongoose Pro. I g...

Had the pleasure of replacing a balljoint today. Axle seal won’t be in until tomorrow so I kept myself busy after work. What a joke! Air hammer they said. Brass punch they said. I tried both for well over an hour to no avail. Had to use a 3lb sledge hammer with an extremely hard pointed chisel to sl...

I would echo the solenoid check. When you depress the brake pedal you should feel it click. Isn’t a common failure with a small plastic gear tooth inside the shifter boot? If you get no click make sure your brake lights are activating and the solenoid is clean. Lots of coffee spills in that area!