Or you go with what bmdubya did and manual swap and FWD the car! By ditching the AWD set up you get rid of many of the AWD and NLA issues.

Neil.

I would post this in the appropriate section (P2, P80), but I don't know what they are! I have two pics of this car and I wonder if the Euro members will jump in and tell us what they're like. Why didn't we get them here in the US? Too much competition in that segment? Volvo V40-R-Design-2013.jpg Th...

Needs New Engine (Seized: Bent Shaft/Rod or Frozen Cylinder)... $1000 obo The Volvo 850 T-5R is a powerful wagon. 240hp and 0-60 in 6.0. Only around 2000 were sent to the USA in 1995. Not many left. Currently a Sedan version selling on ebay for 12k. Drove it into a deep puddle and hydrlocked the eng...

Kesha brought this by over the weekend, and it's a pretty nice car. Needs a couple small things, but nothing major stood out. The only code I pulled was a P0410 code for the SAS. The pump is running, but there may be an issue with the check valve or vac lines. Didn't have much time to dig into it. S...

Update: took it to a mechanic and the fuel pressure read at about 35 psi, so i bought a new one and gonna change it tomorrow, thanks for all your help

This all starts with a "major evap leak". There is a VIDA test that you can run in "vehicle communication", or you can just drive around for a few hundred miles and the test will run on its own, throw a code and light the friendly CEL. First off, your VIN tells you which evap sys...

I'm aware. Sometimes they list parts in VERY weird categories. All the decoupling pulley bits are listed as transmission parts?? https://usparts.volvocars.com/a/Volvo_2009_XC90-32l-6-cylinder/_51507_5832313/Transmission/GR-376577.html?assemblySearchGuid=16494F94-8C91-48CA-8D42-83D352775D1A Anyhow, I...

A few photos from our 25th anniversary weekend trip to Kennebunkport, Maine. We escaped the rain and had a wonderful time exploring the area. We took Frieda the 240 which made the trip even more special. IMG_1775.jpg img_1776.jpg img_1778.jpg IMG_1782.JPG IMG_1784.JPG IMG_1789.JPG IMG_1790.JPG IMG_1...

Legger, Based on my experience your valve is starting to fail. The next time that you change the oil and filter you should inspect the small rubber disc. For a new valve I would expect the following (based on my experience with two Volvo Si6 Engines) --- 3 to 4 minutes after shutdown and the oil lev...

SUCCESS!! I managed to get this working. My solution was to download the drivers from this page https://docs.google.com/document/d/e/2PACX-1vQMkjgKcPdFiIIAo73YQgB9T7Yzx9hG4x9hL_qCDvESTLC_4lhIfxW_V5Y3sWZl0fQTOCi3cpHBdsZa/pub for VX Manager.exe. I had been downloading the same file from the manufactur...