Now with daylight savings, I am driving my 2002 v70xc in the dark more often. When I turn on the high beams, the indication light comes on, I hear a relay click, but the high beam lights do not come on. This has happened before, but intermittently. If I turned the high beams on and off a bunch of t...

My 2007 S60..The tail piece fix (on page 3 of this thread) just failed in one year. My 2006 S60...the previous owner had the local muffler shop did this repair using a rebar as shown. In a way, this is a clever fix, I like it... If you have a shop do it this way, make sure they support the weight of...

The relay looked like this. I swapped it with the one for the fog lights, and now the high beams work!

Turns out some of the bulbs fell out of their black socket. I dissasembled the instrument cluster, put the bulbs back in with a little super glue to prevent them from falling out again.

In the donor chassis to which I transplanted the whole drivetrain and interior from my crashed XC70, I detached the immobilizer antenna from the steering column, glued the only donor's key I've had to it and had it hidden under the dash. Next thing is I drilled the ignition lock security bolts out a...

Bon jour! The angle gear and rear differential take a bit less than one liter each. Many use synthetic 75W-90 gear oil in both, but Volvo actually has a special non foaming gear oil they call for in the angle gear. We are very jealous of your AWD with m58. Add it the Louvre, Versailles, baguette, an...

Here is the build log https://www.swedespeed.com/threads/volvo-s60r-gt3582r-dyno-692-580-awhp-torque-tuned-by-urbastuning-wordpress-com-gustav-aka-contrast.562977/ https://www.swedespeed.com/threads/dougys-s60r.159820/ The shims do move but no reports of liners popping up. https://www.swedespeed.com...

Very cool project! I'm working currently on a similar one. Have some additional sensors in my XC90 (D5244T, P2, 2003) like oil pressure, coolant pressure etc. For my project I'm using a custom PCB that I designed. It is compact and sits directly on the OBD-II port. The schematic is build on @vtl's &...

.
How To Install.
https://blog.fcpeuro.com/how-to-install ... k-brace-p1
. .

matthew1 wrote: ↑24 Nov 2023, 16:10 Wow a Lotus. Question for you BB: what's the "tell" in the photo that it's a Lotus?

He told us. “Elan”. Trick question!