Good day all, I am hoping someone may have an answer to my issue.
my son's 91 240, just recently started with a very strange issue, it starts just fine, but here is the kicker, once running seldomly it wants to start all over again briefly, now I have replaced the starter (NOT OEM) and have replaced ...

good day all, I am hoping someone may have an answer to my issue.
my son's 91 240, just recently started with a very strange issue, it starts just fine, but here is the kicker, once running seldomly it wants to start all over again briefly, now I have replaced the starter (NOT OEM) and have replaced ...

I bought these leds from eBay, pried the legs of the oem bulbs from the sockets and soldered these on,
https://www.ebay.com/itm/10x-Cluster-Speedometer-Gauge-Green-LED-Bulbs-Repair-KIT-For-GM-Chevy-BACKLIGHT-/164298669000?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 they ...

I Replaced the front pads on my 91 240, and I noticed there was a bit of play when wiggling at the 12 and 6, but none when wiggle at the 3 and 6? any thoughts, I am thinking the wheel spindle nut may not be tight enough, any thoughts? any help would be greatly appreciated.

not sure, we got it this year in February, it was fine but slowly it has been getting worse.

I am back at it and having issues with the brakes, all calipers bled properly, but the driver front upper bleed port no fluid or very little comes out, in addition there is also very little pressure, it will stop but the pedal goes all the way to the floor, I just ordered a new MC and four new front ...

is the tach still available?

I bought it from IPD, I just tried looking up my order history, but nothing shows, it will show if I order something again, it was either Ignition Switch - 200/700/900
Aftermarket - VM380 - 9447805 - 126026
or
Ignition Electrical Switch - 140 240 260 -1989
MTC - VM300 - 9203247 - 246487
this time ...

Got it figured out, I had bought an aftermarket ignition switch, it was a dud, it was getting stuck, nothing to do with lock or key at all.

It shifts into gear fine, and drives fine, just can't shut the engine off and pull the key out.