Search found 5 matches
- 08 Sep 2011, 21:20
- Forum: S80 1st gen 1999-2006
- Topic: 2001 S80 Intermittent fan for A/C and Heater
- Replies: 8
- Views: 7733
Re: 2001 S80 Intermittent fan for A/C and Heater
2001 S80, 288,886 miles...I am having the same problem. It happens more in the winter when the heater is needed, but still does it during the summer when the A/C is required. Fan is full on, but only blows part of the time. Hopefully someone can help. Also, occasionally all of the power to the cente...
- 08 Sep 2011, 21:16
- Forum: S80 1st gen 1999-2006
- Topic: Fuel tank lid won't stay shut
- Replies: 6
- Views: 5441
Re: Fuel tank lid won't stay shut
2001 S80 288,886 miles. Mine has done the same. I purchased a kit similar to the above and it worked great for another 75,000+ miles or so. Then the spring portion broke again. Every time I took a left hand turn, the door flew open. When I start again, or go right, the door closes. I resolved the pr...
- 08 Sep 2011, 21:11
- Forum: S80 1st gen 1999-2006
- Topic: changing side lights
- Replies: 2
- Views: 792
Re: changing side lights
Yes, these plastic tabs break off very easily. I currently have one secured with the foam ear plugs and a rubber band. The other was beyond repair and is hanging. I really need to find a way to get that back inside again.
- 08 Sep 2011, 21:02
- Forum: S80 1st gen 1999-2006
- Topic: 2004 S80 A/C Blower
- Replies: 1
- Views: 802
Re: 2004 S80 A/C Blower
I have the same problem with a 2001 S80. 288,886 miles on it. I have the A/C blower turned all the way on, and only switch the A/C on when it blows. If it stops blowing, then I turn the A/C button off (as a precaution). I noticed that it will blow more in the summer months using the A/C than in the ...
- 04 Oct 2008, 09:51
- Forum: S80 1st gen 1999-2006
- Topic: S80 - Position Lights (Front Side Bumpers)
- Replies: 4
- Views: 16321
2001 S80 Side Marker Light
As the manual says - open the door half way and push it out. Just be very careful, and try to pinch the plastic prongs in prior to pushing this out. As any plastic ages, it gets brittle. I forgot this little part when pushing mine out and snapped off one of the holders.






