Thank you for replies to my oval drilled out hole. I wound up tapping the hole out and got a 8 mm bolt to snug up the water pump. 3 weeks with no leaks!! I just wanted to say our bolt did not snap on the way out, but on the way in. We purchased the asin water pump online but did not compare it to th...

Thank you for replies to my oval drilled out hole. I wound up tapping the hole out and got a 8 mm bolt to snug up the water pump. 3 weeks with no leaks!! I just wanted to say our bolt did not snap on the way out, but on the way in. We purchased the asin water pump online but did not compare it to th...

Volvo 850 1994 n/a. Snapped water pump bolt flush to the head. Drilling bolt left oval hole as drill bit wandered during drilling. I'm left with oval shaped hole where the bolt was. What is the best way to repair? Steel putty or weld

Just got a new blower motor relay today. Installed and now all speeds work fine now. It appears that all speeds do go through this relay. Hope this helps some body.

Auto parts store claimed that there was bypass indicated for the blower motor relay. Could this bypass allow speeds 123 to pass through the relay. We swappped out the speed 123 resistor and speed 4 was all that was working after swap. If relay was misplaced originally the bypass feature of the actua...

Has anyone had the issue of blower speed 123 not working and found the relays swapped out in the resistor area? We found this and blower speed 4 was working. Does the schematic show that speeds 123 actually go through the blower motor relay? We found 4 prong relay in blower motor slot on the right a...

I just finished my thermostat on a 1997 850 glt and I stripped the back Tork Screw. The front came out fairly easy after letting them soak for about an hour in PB Blaster. I used the tighten and loosen method that that's recquired for removing the spark plugs on the Ford Explorer engines. Once you h...