Good morning fellas (good morning for us here in Holland), Question for you regarding converting the keyless entry from aftermarket back to OEM. I own a late (november) 1995 T-5R. It has the OBD 1.5 without the flash code reader under the hood. At one moment in time it got it's factory keyless entry...

Nice writeup! After reading this I decided to do the same mod somewhere in the next week or so. Bought this JVC bluetooth headunit with 2 pre-outs. https://www.drivegear.co.nz/product/jvc-kw-r930bt-head-unit/ Let's say, later on I want to add an active sub to the setup. Would this be possible with t...

Hello everybody, Im having some issues with my 1995 T-5R's auto trans. - At WOT, in neither economy nor sport mode, it will shift beyond 5k revs. Always before or at the 5k mark but it will never let the motor go beyond 5k. - In sport mode, under wot acceleration, when it shifts it will hang for a s...

Thanks Sun Mar! I havent driven it more than a few meters actually. Hooked up the vss since i didnt connect it in the first place (hence the codes). I thought i had to manually erase the codes first to get rid of the flashing arrow. I'll have to repair the infamous leaking crimped oil cooler lines f...

Hi Guys I have two error codes coming from one faulty part, a missing VSS signal coming from the back of the auto trans. Long story short, solved the problem, but have the faults still stored in the computer and thus get the flashing arrow. Car: '95 T-5R with a OBD2 port in the centre console but wi...

RickHaleParker wrote: ↑21 Feb 2018, 15:20 14vtggg.jpg

Im gonna check that asap!

Why not connect temporarily with wires/alligator clips or something? If it works just extend the plug by soldering in a longer piece. Yes, again thats a solution for making the electrical part work. But thats not what im after...i know how to make it work. I want to know what iam doing wrong or wha...

I only remember 1 VSS plug on the transmission and it didn't look like that. Do you have the old transmission still? Do the old and new transmission have the VSS in the same locations? Thats the tricky part. I threw the old one in the bin and its emptied already...so I have no reference to the old ...

Early 850 can get VSS signal/ground from the ABS sensor instead of the transmission if you just extend the wires and splice those wires into the ABS wiring at the driver side wheel. Use the multimeter to determine which is signal/ground and you'll be set. Yes thats a solution. But my car is a 95 an...

I am sorry no one has responded quicker, and I am not being much help either as I have not had a manual trans in a P80 for 20 years. All I can suggest is perhaps the manual trans has the connection at a different point or has the cable been trapped during the swap? Not sure where on the manual tran...