2001 XC70 No start after head work

draser · Post by **draser** » 08 Nov 2014, 11:47

Obviously he's struggling with finding correct marks, so looking at the slots will confirm or deny current marks. I attached 2pics with sproket and crank marks, however your sprokets may look different. Another thing is that you may have a bent valve in there, but let's hope not until you get marks sorted.

SwedishMeatballs · Post by **SwedishMeatballs** » 19 Dec 2014, 17:51

Hi guys! back again! the issue I was having was with the spring action on the exhaust VCT gear. The car is now getting good compression but still won't start. It currently has no stored DTC codes but the DDC codes (found by holding down the odometer reset for 30 seconds) pulled up code numbers 22 26 61 and 66.... any new advice would be greatly apprecitated

mrscullini · Post by **mrscullini** » 20 Dec 2014, 07:26

not sure on the codes.

any chance you have the coil wires swapped? this happened to me upon reassembly when i had failed mark them to their corresponding coil.