Need help with error codes Topic is solved

mrHook · Post by **mrHook** » 06 Oct 2016, 04:40

doublebug wrote:every? for your car yes but for CEM some special equipment is need besides DiCE.

dow, aint good then, if need I have to go to a volvo service if it comes to that of new software in CEM. But as you stated before I should not need to but if I do I cant ask for your help I supose?

Post by **doublebug** » 06 Oct 2016, 05:57

I think so

Post by **doublebug** » 06 Oct 2016, 10:27

: Bad guy. Seems to have mechanical issue. Just stuck in open position. After disassembling started working but anyway replaced.

: Pins cut

: Bad guy replaced and the top is a bit treated with varnish

mrHook · Post by **mrHook** » 06 Oct 2016, 13:26

doublebug wrote:
The attachment 20161006_184401.jpg is no longer available
The attachment 20161006_185856.jpg is no longer available

Nice job there, anything in particular I should think about when/if I do it?

Do you got the pin layout for the relay? I suspect that the relay I got for replacement might be in wrong pinout order.

Post by **doublebug** » 06 Oct 2016, 23:34

30 & 85 should be control pins
86 & 87 main pins.

You can check by applying 12v to 30 & 85.

mrHook · Post by **mrHook** » 07 Oct 2016, 01:46

doublebug wrote:30 & 85 should be control pins
86 & 87 main pins.

You can check by applying 12v to 30 & 85.

Then I gotta change it for another. Wrote down the part-no that oyu had so gonna go and buy some of those later today.

Need help with error codes Topic is solved

Re: Need help with error codes