It is worse than that it doesn't come back up
Replace it.
What does the other 19 look like?
Didn't notate hydraulic lifters position
- RickHaleParker
- Posts: 7206
- Joined: 25 May 2015, 14:30
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 980 times
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
- RickHaleParker
- Posts: 7206
- Joined: 25 May 2015, 14:30
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 980 times
1. Hard - good
2. Gives some - Marginal.
3. Soft - failed.
From what you saying above I count 2 good, 17 Marginal 1 failed. If that was my score, I would do a new set and be done with it. You going to do the valve stem seals and lap the valves while you got it all open?
2. Gives some - Marginal.
3. Soft - failed.
From what you saying above I count 2 good, 17 Marginal 1 failed. If that was my score, I would do a new set and be done with it. You going to do the valve stem seals and lap the valves while you got it all open?
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
I already did valve stems lap? Head gasket replaced cleaned heads block new starer new water pump new pcv system, new crank seals, new tensioner timing belt, new timing belt, new oil pan. Might as well get new lifters!!!! Lol now all put back together to the cams
-
precopster
- Posts: 7543
- Joined: 21 Aug 2010, 00:20
- Year and Model: Lots
- Location: Melbourne Australia
- Has thanked: 8 times
- Been thanked: 128 times
I always thought that soft meant they had air in them; they are not a sealed unit and will refill with 100% oil in their own in time.
I once rebuilt a 10 valve Volvo 850 head and the lifters ticked away for more than 2 weeks until they totally filled. Kept the car for a year and the noise didn't return.
I once rebuilt a 10 valve Volvo 850 head and the lifters ticked away for more than 2 weeks until they totally filled. Kept the car for a year and the noise didn't return.
Current cars VW Transporter 2.5TDI, 2010 XC90 D5 R Design
- RickHaleParker
- Posts: 7206
- Joined: 25 May 2015, 14:30
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 980 times
I always thought that soft meant they had air in them; they are not a sealed unit and will refill with 100% oil in their own in time.
They do have check valves in them. They are suppose to fill and hold oil even when the engine is off. In the video you see oil oozing out on the third one when he presses down, that is a failed check valve. The check valves are what keep the valve train from chattering every time you start the engine. They also regulate the adjustment. The hard one will regulate well. The Semi-soft ones will do OK. The soft ones that spring back up would work but barely.
1. The hard one are holding oil at the right pressure.
2. The Semi-soft are holding pressure but not at the right pressure.
3. The soft ones are holding very little pressure.
#2 and #3 will pump up when the engine is running but they will chatter until they do.
The real bad one that Kevin Bug has is completely collapsed, it is not holding pressure at all and will not pump up when the engine is running because it cannot hold any pressure.
They do have check valves in them. They are suppose to fill and hold oil even when the engine is off. In the video you see oil oozing out on the third one when he presses down, that is a failed check valve. The check valves are what keep the valve train from chattering every time you start the engine. They also regulate the adjustment. The hard one will regulate well. The Semi-soft ones will do OK. The soft ones that spring back up would work but barely.
1. The hard one are holding oil at the right pressure.
2. The Semi-soft are holding pressure but not at the right pressure.
3. The soft ones are holding very little pressure.
#2 and #3 will pump up when the engine is running but they will chatter until they do.
The real bad one that Kevin Bug has is completely collapsed, it is not holding pressure at all and will not pump up when the engine is running because it cannot hold any pressure.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
- ZionXIX
- Posts: 1316
- Joined: 11 Aug 2014, 14:47
- Year and Model: 1996 850 Turbo S/W
- Location: Texas
- Has thanked: 66 times
- Been thanked: 195 times
FCPeuro has the same kit for less than $190 and you get lifetime warranty.KevinBug wrote: 16 Jan 2018, 19:08 Should I replace all of them I saw the whole 20 for 192, supposed to be genuine Volvo from europarts
https://www.fcpeuro.com/products/volvo- ... v70-270866
Scarlett: 1996 850 Turbo Wagon in Reagent Red Pearl ~210K mi
Norman: 2012 F150 XLT Crew Cab in Oxford White ~110K mi
Ember: 2005 XC90 2.5T FWD in Ruby Red Metallic ~83K mi *Newest addition to the fleet*
Ruby: 1997 850 Turbo Wagon in Reagent Red Pearl - parts car
Rose: 2020 Ram 1500 in Delmonico Red Pearl - SWMBO's Vehicle
Norman: 2012 F150 XLT Crew Cab in Oxford White ~110K mi
Ember: 2005 XC90 2.5T FWD in Ruby Red Metallic ~83K mi *Newest addition to the fleet*
Ruby: 1997 850 Turbo Wagon in Reagent Red Pearl - parts car
Rose: 2020 Ram 1500 in Delmonico Red Pearl - SWMBO's Vehicle
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 2038 Views
-
Last post by jimmy57
-
- 5 Replies
- 1259 Views
-
Last post by jimmy57
-
- 2 Replies
- 743 Views
-
Last post by stephansvolvo
-
- 4 Replies
- 1265 Views
-
Last post by cn90
-
- 7 Replies
- 1435 Views
-
Last post by jason1980






