Seat Side Molding Manual Seat Height Adjustment

sstevens · Post by **sstevens** » 29 Jun 2019, 18:43

Does anyone know how to install a new Seat Side Molding on a seat with a Manual Height Adjustment lever? This is for a 2005 Volvo S 60 without power seats. The lever does not appear to be easily removed and I do not want to crack the new molding by trying to force it over the lever handle.

Found a hex screw on bottom of plastic lever, and when removed, lever easily removed.

DrDan · Post by **DrDan** » 30 Jun 2019, 02:49

Now my car is a 2002 and they did change the seats I think for the 04 MY but maybe this helps. You have to remove the lever handle first. Pull it up to reveal a clip on the inner (seat cushion facing) side. Release the clip and remove the handle.

: Lever and handle

Edit:add photo

sstevens · Post by **sstevens** » 30 Jun 2019, 06:01

Thanks. Handle is different on 05. Tough to find any clips

DrDan · Post by **DrDan** » 30 Jun 2019, 07:43

Well, I half expected that. The clips are too obvious on the variant I have. Good luck finding the solution!