Thanks for the help, worked like a charm...

98 S70 130K.... I turned on A/C and it's blowing warm air.. The clutch or compressor(located under alternator) clicks on and off continuously...

Thanks Fazool for the reply, I will get some pictures and post. I looked, but to my untrained eye, it looks like there's a good amount of meat left on the pads. But one more thing only because I find this really interesting. According to your diagram my rotors will continue to wear deeper into the g...

Thanks for your replies.. This is possible on both front rotors, both sides inside and out? Rear show normal flat wear. I'm not looking for a problem if there isn't one but seems pretty weird to have matching grooves on both sides...

My 98 S70 (133k) had new front pads and rotors at 106k 2 1/2 yrs ago. I really don't check brakes often but I noticed the rotors look like the pads had a wire comb on them making many circular grooves in the rotors. Outside and inside of the fronts. What's happening here?
Brad98s70

Hi Matt,
Can you sign me in also?

98S70 130K

Thanks for the input. Just finished, but I don't like the way you just shove the bulb up into a plastic hole. It's all buttoned up now but I wish I had put some tape around the socket to hold it in place. Seems like over time gravity may push it out.. And you say: it was in there for 13 years and it...

I dont have any light that shows when you are in PRND on the stick shift...... Is this an easy fix? Any DIY pics?
Also, right side of speedometer and left side of the RPM gauge lights are out.

Thanks
brad 98S70 130K

Thanks for the suggestions.. Had to muscle it out, twisting and pulling with pliers. Obviously no one checked this in a long time. Need a drain and fill I suppose!

OK, sprayed wd-40, no luck! I'm going to use more force. Hope I dont pull the tube out with it....But I'll buy a new stick b4 I try again...