Saving information

I was able to do a temporary repair for $50 , now the light works. I was able to wire in a Napa Bk 7358921 4 pin 30 amp relay. It seems the CEM module has a short in the power wire to the driver head light. Shorted CEM or a break in wire from the Cem to the light socket. The #2 pin on the plug is th...

I replaced the Antenna/immobilizer. The antenna goes around the ignition switch. You can see the key position on the switch. | || ||| . Look at the ignition were the key goes. The antenna senses the key in the ignition. It then puts power to the modules. So far so good. We have started it 30 + times...

06, v 8. 8 mth. old new oem starter. Key to start positon. No starter engagement. No noise or clicking. Cycle shifter lever 20 times from park to drive . Starts up . Starter will then work for some time. This issue has been going on for a week now. Acted up 2 times this week after 50 or starts. I sc...

Does anyone know of a good remann starter motor out there. Looks like OEM only for $444.00 Nippendenso has control of this 2 yr only produced starter. No parts list and no new other then Volvo only. The v8 xc is showing signs of slow starts. Battery and Alt. replaced last yr. Starter is the second o...

Re: 2006 XC 90 V8 engine noise when cold, timing tensioner? Postby VFLXC90 » 14 minutes ago I changed the oil from 0/40 mobile one synthetic to 10/30 mobile one synthetic. The noise went away. I spoke to a few people who race for a hobby. They indicated the thin oil 0/40 was to thin for this engine ...

I changed the oil from 0/40 mobile one synthetic to 10/30 mobile one synthetic. The noise went away. I spoke to a few people who race for a hobby. They indicated the thin oil 0/40 was to thin for this engine during cold start up. The tolerances in this 2006 engine are a little looser then the newer ...

I hope the information is helpful. If the dealership indicates they found an engine for X amount. You will have this site to reference what the cost is to the public. Most shops receive 25to 35% markup on parts. If you push the shop to use the engine you found. They will most likely advise they won'...

oragex,
Thanks for the site regarding the resister and purchasing. I purchased a BEHR. It is manufactured for Volvo for about $90.00. I probably would of spent the $33.00 instead.
Do you have any other sites were you have made purchases and have been happy with there product.
Thanks
VFL

Thanks for the replays. I purchased a replacement motor. Since it was making some noise and there was some residue dust from the brushes etc. I checked the on line stores and settled with FCP . $89.00 delivered. They have a lifetime warranty on anything they sell and they price match to Rock Auto ju...