
Driveshaft center bearing — 2002 V70 XC — replaceable?
I hope someone can help me figure out if the driveshaft center bearing for my 02 V70 XC AWD automatic is replaceable. I’m having a hard time finding…
I hope someone can help me figure out if the driveshaft center bearing for my 02 V70 XC AWD automatic is replaceable. I’m having a hard time finding…
There are a few different systems.
Gen 1 that is the 850 platform is the delicate one.
Gen 2 2001-2002 XC70 is less so but still needs care.
All others since then are very low in problems other than a pressure/temp sensor that has been updated.
The front drive connection to rear drive is via wavy discs splined alternately to input and output with a silicone gel, viscous coupling, VC.
There is also a one way clutch in the VC that is overridden up to approx 30 mph so you can have power to rear wheels in reverse.
Let’s talk Workbench Driveshaft Refurb Well, I pulled the entire driveshaft, cleaned & reassembled the joint ‘on my bench’ (in the boot) & it all went back together…
Hearing a Whining Noise? Diagnosis Help and Advice on XC90 AWD System It had a noise when accelerating when cold, it sounded like someone tapping a pan under…
Let’s get to this Maintenance Checklist I’ve got a 98 S70 GLT with 242k miles. This weekend I replaced the PCV system, plugs and wires. What other “high-mileage” maintenance should…
AWD Volvo’s Driveshaft Maintenance For all AWD Volvo Models MVS Forum member Jimmy tells us explicitly how to make your AWD Volvo system go well over 100k miles.…
Hearing a Clanking noise when driving? The 1998-2000 AWD v70 use 3 different drive shafts. 1. early 1998 2. late 1998 – 1999 3. 2000 You need the…
Check out this Front Driveshaft Removal Tutorial Front Driveshaft and CV Replacement Tutorial I received my drive axle back from the shop in Denver called Axle and Drivesaft…
Having AWD issues? AWD Center Carrier Mount Failure I was just about to reply that the center carrier mount was definitely causing your problem when you posted that…
From reading this and other forums, lots of people are running former AWD cars w/o the driveshaft. The actual driveshaft unbolts from the angle gear and the viscous…
1. Prop up the car with 2 jack stands on each side
2. Remove the wheel and the bolt that hold the axle in from the outside of the wheel (on the cv side)…